![]() If something else happens, if for instance, the computer switches on and then right off again, then it didn’t work. When it is done, the PC should reset and then boot as usual. While it is working, the QFlash LED will blink. If this works, the PC will turn on, but the monitor will stay dark. Open the PC case and press the QFflash Plus button. Insert the flash drive into the QF+ USB port.Ĭopy full.rom to the flash drive and rename it “GIGABYTE.bin”. It will be labeled “BIOS” on the back panel. Take note of where the USB port for QFlash Plus is. Ensure, that the name is not too long, not too short, and not too generic!Įnsure, that you can successfully load the profile. Do not save it in a file using the “HDD/FDD/USB” option. The profile needs to be saved in a free slot (on the flash chip). Z690AORUSELITEDDR4.F23).Įnter Advanced Mode (F2 key) and go to “Save and Exit” Copy the BIOS file from the BIOS update download onto the drive (e.g.Extract FPTW64.exe and ifrextractor.exe into the work folderĮnsure that the flash drive’s file system is FAT32.I will use the free version of Hex Editor Neo UEFITool NE A65 (UEFITool_NE_A65_win64.zip)Ī hex editor. IFRExtractor RS v1.5.1 (ifrextractor.exe) (FPTW64.exe) from Intel CSME ADP tools (v16.0 r8) Intel (R) Flash Programming Tool Version: 16. All of these tools are also available for Linux, if you prefer that (including Intel FPT). Z690AORUSELITEDDR4.F23) into the work folder.Īll of these tools are open source, except for Intel’s FPT and the hex editor (but you can use any hex editor you like of course), and you can compile them from scratch if you like. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |